To keep your Cub Cadet Zero Turn Mower running in top-tier condition, changing the oil should always have a spot on your regular maintenance to do list. Fresh oil is what keeps your Cub Cadet mower operating smoothly, and without that fresh oil, your machine will begin to suffer premature wear and tear which can often lead to unnecessary–and costly– repairs. Both a regular and seasonal task, changing the oil can be accompanied by other regular maintenance tasks–checking your spark plugs and tires, belts, and blades, just to mention a few. When you're in need of replacement Cub Cadet parts, use our Parts Lookup tool, and find the parts you need for your model by referring to your Cub Cadet Zero Turn Mower Parts Diagram.
Change the Oil on your Cub Cadet Zero Turn Mower
Keep in mind that you can use the siphon pump or drain plug method to change the oil in your mower–the methods are similar, but require a couple different steps, all detailed below in our Oil Change Guide.
1. Prepare yourself and your equipment for maintenance. Move your lawn mower to a flat surface and make sure the mower is off.
2. Wait until the engine has cooled before beginning any work. Once cooled, take out the ignition key and disconnect spark plug ignition wires. For added safety, engage the parking brake.
3. Clean any debris that's found its way near the oil fill tube. Once cleaned, remove the dip stick.
3. Using a siphon pump, put the top tube in the dip stick hole and the bottom tube into the oil pan. Use a recyclable bottle or empty oil container to more easily dispose of the oil after you're done. To prime the siphon pump, pump the handle three or four times. Once the liquid begins to flow, discontinue pumping.
4. After you remove the pump, add your new oil. Refer to your operator's manual for any oil specifications unique to your mower model.
5. If you're going to use the drain plug method rather than the siphon pump, put a catch basin or empty container under the drain hose. Snap the hose onto the opening and position over the oil catcher.
6. Now you can remove the drain plug in order to empty the old oil from your mower.
7. Still operating with the drain plug method, replace the drain plug and remove the drain hose. Add new oil.
8. When you've added the new oil, you can replace the dip stick. Wait a few minutes. Check your dip stick to ensure that you've filled to the appropriate oil level.
9. Inspect the oil filter before removing it from the mower. Once you've removed the old oil filter, lubricate the gasket of the new oil filter before installing.
10. Now you're ready to re-attach the spark plug ignition wire. Make sure you're responsible in appropriately disposing of the old mower oil. Also be sure to disengage the parking brake, as well as running the mower in a well-ventilated place to circulate the new oil through the engine before mowing.
For additional assistance in servicing your Cub Cadet Zero Turn Mower or finding the right Cub Cadet replacement part, contact a CC Parts n' More specialist today.
.svg)
.png)
